Hyundai Venue (QX): Automatic Transaxle Control System / Output Speed Sensor. Specifications
| Specifications |
|
Items |
Specifications |
|
|
Operation condition [°C(°F)] |
(-40 to 150) -40 to 302 |
|
|
Output voltage(V) |
High |
1.18 - 1.68 |
|
Low |
0.59 - 0.84 |
|
Description The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM.
Removal • When Diagnostic Trouble Codes (DTC) is on, perform the following procedure to replace it.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Hyundai Venue (QX) (2020-2026) Service Manual: Heater & A/C Control Unit (DATC). Repair procedures
Self Diagnosis 1. Self-diagnosis process. • When operating the self-diagnostics, the below fault(self-diagnostics code) will blink at 0.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Remote Key
- Trip Computer
- Engine Coolant
- New on site
- Most important about car
