| Circuit Diagram |


Inspection Front Power Window Motor 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim.
Circuit Diagram Driver Power Window Switch [Auto Down + Door Lock] [Auto Up/Down + Safety + Door Lock] Assist & Rear Power Window Switch
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.