Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the door trim. (Refer to Body - "Front Door Trim") 3.
Component Location 1. Drive power window main switch 2. Passenger power window main switch 3. Rear window switch 4.
Inspection • Before measuring the pressure of the refriferant line, check whether the refrigerant amount is charged in accordance with the specified charging amount.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.