| Special Service Tools |
|
Tools (Number and name) |
Illustration |
Use |
|
09200-3N000 Engine support fixture (Beam) |
|
Removal and installation of the transaxle. Use this beam (SST No. : 09200-3N000) with the supporter (SST No. : 09200-2S000). ※Permit operating with 09200-38001. |
|
09200-2S000 Engine support fixture (Supporter) |
|
Removal and installation of the transaxle. Use this supporter (SST No. : 09200-2S000) with the beam (SST No. : 09200-38001/3N000)). |
|
09452-26100 Oil seal installer |
|
Installation of the differential oil seal in the transaxle case and housing
side(2WD). [Using with bar (SST No.09231-H1100)] |
|
09231-H1100 Bar |
|
Installation of the differential oil seal in the transaxle case and housing
side. [Using with oil seal installer (SST No.:09452-26100)] |
|
09480-A3800 Inhibitor switch neutral fixed pin |
|
When installing the manual control lever on the inhibitor switch, used to
align the neutral position. |
Specifications Item Specifications Transaxle type A6GF1 - 2 Engine type Gasoline 1.
Troubleshooting â–¶ Fault Diagnosis Features a fail-safe mechanism that provides "limp-home" 4th gear hold to enable the vehicle to be driven to the owner's home or dealer shop.
Inspection 1. Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature. 1. Ambient Sensor (+) 2.
Component Location 1. Blower unit assembly Component Location 1. Intake seal 2. Intake upper case 3. Intake actuator 4. Intake door 5. Intake lower case 6. Blower pad 7.