Hyundai Venue (QX): Hydraulic System / SS-A Solenoid Valve (ON/OFF). Components and components location
| Component Location (1)_Valve Body Cover |
| 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector |
| Component Location (2)_Solenoid Valve |
| 1. 26 Brake Control Solenoid
Valve 2. 35R Clutch Control Solenoid Valve 3. Underdrive Brake Control Solenoid Valve 4. Overdrive Clutch Control Solenoid Valve 5. ON/OFF Solenoid Valve 6. Torque Converter Control Solenoid Valve (Damper Clutch Control Solenoid Valve) 7. Line Pressure Control Solenoid Valve 8. Support Bracket (Direct Control Solenoid Valve) 9. Support Bracket (Indirect Control Solenoid Valve) 10. Roller |
Specifications ▷ Control type : Normally low type Shape Items Specifications Control current (voltage) [V] 9 - 16 Supply pressure [kpa (kgf/cm², psi)] 490.
Inspection • Refer to the DTC manual for the check procedure.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Unit. Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery / recycling / charging station. 3. When the engine is cool, drain the engine coolant from the radiator.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Warning and Indicator Lights
- Remote Key
- Emission Control System
- New on site
- Most important about car
