Hyundai Venue (QX): TailGate / Tail Gate Assembly. Components and components location
| Component Location |
| 1. Tailgate assembly |
Adjustment 1. Place the car on a flat surface and check whether thebody and trunk lid are well-aligned. 2.
Replacement 1. Remove the TailGate trim. (Refer to tailgate - "Tailgate Trim") 2. Using a flat-tip screwdriver, lift up slightly the socketclips (A) of both ends on the lifter (B), and thenremove the lifter from the bracket.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Unit. Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery / recycling / charging station. 3. When the engine is cool, drain the engine coolant from the radiator.
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Rear Seat Assembly. Repair procedures
- Instrument Cluster
- Brake System
- New on site
- Most important about car
