Hyundai Venue (QX): Intake Air Temperature Sensor (IATS) / Troubleshooting

Hyundai Venue (QX) (2020-2026) Service Manual / Engine Control / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) / Troubleshooting

Singal Waveform

Hyundai Venue. Troubleshooting

    Specification Temperature [°C (°F)] Resistance (kΩ) -40 (-40) 40.93 - 48.35 -30 (-22) 23.

    Circuit Diagram [M/T] [A/T] Harness Connector

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures

    Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.

    Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Temperature Sensor. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0219