Hyundai Venue (QX): Engine Control System / Intake Air Temperature Sensor (IATS)
Inspection 1. Connect a diagnostic tool on Data Link Connector (DLC). 2. Check MAPS output voltage at idle and IG ON.
Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Immobilizer Control Unit. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to Body - "Glove Box Housing") 3. Remove the smart key unit (A) after loosening the nuts.
Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Warning and Indicator Lights
- Electronic Stability Control (ESC)
- Instrument Cluster
- New on site
- Most important about car
