Hyundai Venue: Rear Seat Belt / Rear Seat Belt Buckle. Repair procedures
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Cushion Assembly")
|
2. |
Press the lock pin and separate the connector (A).
|
3. |
Loosen the mounting bolt and remove the rear seat belt buckle (B).
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)
|
[RH]

[LH]

|
4. |
To install, reverse removal procedure.
•
|
The buckle and tongue of different types are impossible
to be latched, so check that the buckle & tongue have
the same types.
|
•
|
Distinguish the rear side seat buckle from the center
seat buckle before latching.
|
•
|
If foreign materials are stuck in the inside button
of buckle, it may cause interference during the latching
process, leading to a functional problem (for example-
beverages (viscous drinks), toothpicks, sand, plastic,
vinyl, metal pieces, etc.).
|
•
|
After latching the buckle and tongue, check the fastening
force using a Push-Pull Gauge (fastening force: 3kgf
or less)
|
|
|
Other information:
General Service Information
Protection of the Vehicle
Always be sure to cover fenders, seats, and floor areas prior to beginning work.
•
The support rod must be inserted into the hole near the edge
of the hood whenever you inspect the engine compartment to prevent
the hood from falling and causing possible injury...
..
Categories

1. Door lock/unlock button
2. Outside rearview mirror control switch
3. Central door lock switch
4. Power window switches
5. Power window lock switch
read more