| Components |

| 1. Side Impact Sensor (SIS) |
Description Side Impact Sensor (SIS) system consists of two SIS which are installed at each center pillar nearby (LH and RH). Side Impact Sensor is also called A-SIS because it detects acceleration.
Removal Side Impact Sensor 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Refrigerant System Service Basics (R-134a) Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning system.
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.