Hyundai Venue: TailGate / Tail Gate Assembly. Components and components location
Hyundai Venue (QX) (2020-2023) Service Manual / Body (Interior and Exterior) / TailGate / Tail Gate Assembly. Components and components location
| Component Location |
| 1. Tailgate assembly |
Repair procedures
Adjustment
1.
Place the car on a flat surface and check whether thebody and trunk
lid are well-aligned.
2...
Tail Gate Assembly. Repair procedures
Replacement
1.
Remove the TailGate trim.
(Refer to tailgate - "Tailgate Trim")
2.
Using a flat-tip screwdriver, lift up slightly the socketclips (A) of
both ends on the lifter (B), and thenremove the lifter from the bracket...
Other information:
Hyundai Venue (QX) (2020-2023) Service Manual: Components and components location
..
Hyundai Venue (QX) (2020-2023) Owners Manual: System Operation
Cooling / Ventilation 1. Select the Face Level mode. 2. Set the air intake control to fresh mode. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. Heating 1. Select the Floor Level mode...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- To set Cruise Control speed
- Shift-lock system, Shift-lock release, Parking
- Remote Key
- New on site
- Most important about car
Smart Key
Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate.
1. Door Lock
2. Door Unlock
3. Remote start
Copyright © 2023 www.hvenueqx.com