Hyundai Venue (QX): Ignition Lock Switch / Clutch Switch. Description and operation
| Description |
| – |
Clutch operation is detected through clutch switch signal. This signal
enables ECM to cope with instant change of load condition.
|
| – |
Clutch switch signal is used to detect engaged gear with vehicle speed
and engine speed.
|
| Ignition lock & clutch switch operating locus |
| – |
If the clutch pedal is pressed down, (A) operate ignition lock switch
at a location.
|
|||||||||||
Specifications Item Specifications Working voltage DC 12.5V ± 0.3V Operating force Initial position : 0.
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: A/C Pressure Transducer. Repair procedures
Inspection • Before measuring the pressure of the refriferant line, check whether the refrigerant amount is charged in accordance with the specified charging amount.
Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Instrument Cluster
- Electronic Stability Control (ESC)
- Maintenance
- New on site
- Most important about car
