| Component Location |

| 1. Hood latch assembly |
Replacement 1. Pull out the hood latch release handle. 2. Separate the hood latch release handle cable (A).
Replacement 1. Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover") 2.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.
Description Rear view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the AV monitor or the ECM (Reverse Display Room Mirror) mirror while backing-up.