Hyundai Venue (QX): Hood / Hood Latch Release Handle. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle. Repair procedures

Replacement
1.
Pull out the hood latch release handle.
2.
Separate the hood latch release handle cable (A).

Hyundai Venue. Hood Latch Release Handle. Repair procedures
3.
Loosen the mounting screws and remove the hood latch release handle (A).

Hyundai Venue. Hood Latch Release Handle. Repair procedures
4.
Install in the reverse order of removal.
Hyundai Venue. Hood Latch Release Handle. Repair procedures   
•
Make sure the hood latch cable is connected properly.
•
Make sure the hood locks / unlocks and opens / closes properly.

    Component Location 1. Hood latch release handle

    Component Location 1. Hood latch assembly

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Schematic diagrams

    System Block Diagram Component Parts And Function Outline Component part Function Vehicle-speed sensor, ESP/ABS Control Module Converts vehicle speed to pulse. ECM Receives signals from sensor and control switches.

    Hyundai Venue (QX) (2020-2026) Service Manual: Troubleshooting

    Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surging" (repeated alternating acceleration and deceleration) occurs after setti

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0156