Hyundai Venue (QX): Hood / Hood Latch Release Handle. Components and components location

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle. Components and components location

Component Location

Hyundai Venue. Hood Latch Release Handle. Components and components location

1. Hood latch release handle


    Replacement 1. Remove the hood weatherstrip (A).    • Be careful not to scratch the hood weatherstrip.

    Replacement 1. Pull out the hood latch release handle. 2. Separate the hood latch release handle cable (A).

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation

    Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.

    Hyundai Venue (QX) (2020-2026) Service Manual: Description and operation

    Description and Operation Blcok Diagram    • This system monitors the driving situations through the radar and the camera. Thus, for a situation out of the sensing range, the system may not normally operate.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0096