| Singal Waveform |



Specification [Bank 1 / Sensor 1] Item Specification Heater Resistance (Ω) Approx.
Circuit Diagram [M/T] [A/T] Harness Connector [Bank 1 / Sensor 1] [Bank 1 / Sensor 2]
Component Location [Engine Room] 1. Condenser 2. Discharge hose 3. Suction & Liquid tube assembly 4. Compressor 5. Service port (High pressure) 6. A/C Pressure transducer (APT) 7. Service port (Low pressure) 8.
Removal 1. Remove the bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the connector (A) from the PDW sensor. [L - Type] Installation 1.