Hyundai Venue: Cowl Top Cover / Repair procedures
Hyundai Venue (QX) (2020-2025) Service Manual / Body (Interior and Exterior) / Cowl Top Cover / Repair procedures
| Replacement |
| 1. |
Remove the plug hole (A), loosen the mounting nuts and remove the wiper
arm (B).
|
| 2. |
Separate the washer nozzle (A).
|
| 3. |
Detach the clips and remove the cowl top cover (A).
|
| 4. |
To install, reverse removal procedure.
|
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Front Impact Sensor (FIS). Description and operation
Description • The front impact sensor (FIS) is installed on the upper of the side panel in Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at their mounting locations...
Hyundai Venue (QX) (2020-2025) Service Manual: Special service tools
Special Service Tools Tool (Number and name) Illustration Use 09977-3R000 Disc & hub assembly bolt remover Removal and installation of disc & hub assembly...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Smart Key
- Vehicle Identification Number (vin), Vehicle Certification Label
- Lighting control
- New on site
- Most important about car
Fuel gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
The fuel tank capacity is given in chapter 2. The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty. On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
Copyright © 2025 www.hvenueqx.com