Hyundai Venue (QX): Ignition Lock Switch / Clutch Pedal. Components and components location
| Components |
| 1. Clutch pedal assembly 2. Clutch pedal arm 3. Ignition lock & clutch switch |
4. Clutch master cylinder 5. Reservoir hose |
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel.
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3.
Hyundai Venue (QX) (2020-2026) Service Manual: Antenna Coil. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shroud panel.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Engine Coolant
- Safety System
- Tire Pressure Monitoring System (TPMS) (Type A)
- New on site
- Most important about car
