Hyundai Venue (QX): Emergency Situations
- Hazard Warning Flasher
- In Case of an Emergency While Driving
- If the Engine Will not Start
- Jump Starting
- If the Engine Overheats
- Tire Pressure Monitoring System (TPMS) (Type A)
- Tire Pressure Monitoring System (TPMS) (Type B)
- Check Tire Pressure
- Tire Pressure Monitoring System
- Low Tire Pressure Telltale
- TPMS Malfunction Indicator
- Changing a Tire with TPMS
- If you Have a Flat Tire (With spare tire)
- Towing
The certification label is located on the driver’s door sill at the center pillar and shows the maximum allowable weight of the fully loaded vehicle.
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Antenna Coil. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shroud panel.
Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Temperature Sensor. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Repair procedures
- Electronic Stability Control (ESC)
- Remote Key
- New on site
- Most important about car
