Diagnosis with GDS Diagnosis with GDS 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (GDS).
Component Location 1. Sunroof switch 2. Sunroof motor & controller 3. Sunroof
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Removal 1. Remove the bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the connector (A) from the PDW sensor. [L - Type] Installation 1.