Hyundai Venue: Steering System / Steering wheel

Hyundai Venue (QX) (2020-2024) Service Manual / Steering System / Steering wheel

Repair procedures

Inspection Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead...

Components and components location

Components 1. Drive air bag module (DAB) 2. Steering wheel 3. Wiring 4. Bezel 5. Remote control switch 6...

Other information:

Hyundai Venue (QX) (2020-2024) Owners Manual: Tires and Wheels


NOTICE It is permissible to add 3 psi to the standard tire pressure specification if colder temperatures are expected soon. Tires typically loose 1psi (7kPa) for every 12°F temperature drop. If extreme temperature variations are expected, recheck your tire pressure as necessary to keep them properly inflated...

Hyundai Venue (QX) (2020-2024) Service Manual: Camshaft Position Sensor (CMPS). Repair procedures


Inspection 1. Check signal waveform of CKPS and CMPS using a scan tool. Specification : Refer to "Waveform" Removal    • DON’T remove the camshaft position sensor during engine running or right after engine stops, or a scald by the flowed out engine oil may occur...

Categories

Master warning mode

Hyundai Venue. Master warning mode

This warning light informs the driver the following situations.

-- Forward Collision-Avoidance Assist system malfunction (if equipped)
-- Forward Collision-Avoidance Assist radar blocked (if equipped)
-- Blind-Spot Collision Warning system malfunction (if equipped)
-- Blind-Spot Collision Warning radar blocked (if equipped)
-- Lamp malfunction (if equipped)
-- High Beam Assist malfunction (if equipped)
-- Tire Pressure Monitoring System (TPMS) malfunction (if equipped)

read more


 
Copyright © 2024 www.hvenueqx.com