Hyundai Venue: Body Electrical System / Smart Key System
Hyundai Venue (QX) (2020-2025) Service Manual / Body Electrical System / Smart Key System
- Specifications
- Components and components location
- Description and operation
- Smart Key. Repair procedures
- Smart Key Unit. Components and components location
- Smart Key Unit. Schematic diagrams
- Smart Key Diagnostic. Repair procedures
Mic. Repair procedures
Inspection
1.
Disconnector the negative (-) battery terminal.
2.
Remove the mic after disconnect the connector...
Specifications
Specifications
Smart Key Unit (Integrated Body Contorl Unit(IBU))
Items
Specification
Rated voltage
DC 12V
Operating voltage
DC 9 - 16V
Operating temperature
-40°F to 185°F (-40°C to 85°C)
Load
Less than 3...
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures
Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the front sensor to stop functioning...
Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 3...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Electronic Stability Control (ESC)
- Remote start
- To set Cruise Control speed
- New on site
- Most important about car
Remote Key
Your HYUNDAI uses a remote key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate.
(1) Door Lock
(2) Door Unlock
(3) Panic
Locking Your Vehicle
To lock your vehicle:
1. Make sure all doors, the engine hood and the liftgate are closed.
Copyright © 2025 www.hvenueqx.com